FIX: Windows 10 Stuck on Making Sure you’re Ready to Install

Windows 10 stuck on making sure you’re ready to install. There are many reasons that you might get an error message while updating or installing Windows 10. However, common errors can be eliminated in a few simple steps that you can carry out yourself. 

Note: When you upgrade, your device will be upgraded from an older version of Windows – e. B. Windows 7 or Windows 8.1 – updated to Windows 10.

Before looking for a specific error code, follow the steps outlined in General Troubleshooting. If these don’t fix your upgrade or installation problem, check the table of error codes at the end of this article.

General Bug fixes

Here are some suggestions for troubleshooting upgrade and installation errors: 

Remove External Hardware

  • Update Windows
  • Uninstall non-Microsoft anti-virus software
  • Uninstall unnecessary software
  • Free up storage space
  • 0xC1900101 error

An error that starts with 0xC1900101 is usually a driver error. If you are seeing any of the following error codes, first try these steps to resolve the issue. windows 10 stuck on making sure you’re ready to install. If these steps don’t work, see Resolving Windows 10 Upgrade Errors for more detailed technical information.

  • 0xC1900101 – 0x2000c
  • 0xC1900101 – 0x20017
  • 0xC1900101 – 0x30018
  • 0xC1900101 – 0x3000D
  • 0xC1900101 – 0x4000D
  • 0xC1900101 – 0x40017
  1. Make sure your device has enough storage space: The device requires at least 16 GB of free space to upgrade a 32-bit operating system and at least 20 GB of free space to upgrade a 64-bit operating system. For more information, see Freeing up space in Windows 10 .
  2. Run Windows Update multiple times: Download and install any updates available from Windows Update, including software updates, hardware updates, and some third-party drivers. Use the Windows 10 troubleshooter to fix Windows Update errors. 
  3. Check the third-party drivers and download any updates: You can find third-party drivers and installation instructions for hardware that you’ve added to your device on the manufacturer’s website. 
  4. Remove any additional hardware: Remove all external storage devices and drives, docking stations, and other hardware components that you have connected to the device and that are not required for basic operation.
  5. Check Device Manager for errors: Click the start button, and in the search box on the taskbar, type device manager. Select Device Manager from the results. In the window that appears, find any devices that have a yellow exclamation mark next to them (you may need to select each category to navigate to the device list). Press and hold (or right-click) the device name and select Update Driver Software or Uninstall to correct the errors.
  6. Remove third-party security software: Make sure you know how to reinstall the programs and have any required product keys available. Windows Defender will protect your device in the meantime.
  7. Repair hard drive errors: Click the start button, and type command prompt in the search box on the taskbar . Select Command Prompt from the list of results. In the window that appears, type chkdsk / f C: and press ENTER. The hard drive repairs will begin automatically and you will be prompted to restart your device. Note:  You need administrator rights on your device for this.
  8. After the repair, do a clean restart to Windows: Here’s how.
  9. Restoring and Repairing System: Files Click the start button, and type command prompt in the search box on the taskbar . Select Command Prompt from the list of results. In the window that appears, type ISM.exe / Online / Cleanup-image / Restore health and press ENTER. ( Learn how to repair a Windows image ) Note:  You need administrator rights on your device for this.

Other Common Mistakes

The following table lists the most common update and installation errors and some things you can try to resolve them. If you’re still having problems upgrading or installing Windows 10, contact Microsoft support .

ErrorMeaning and procedure for Rectification
0xc1900223This indicates that there was a problem downloading and installing the selected update. Windows Update will try again later and you do not need to do anything at this point.
0xC1900208 – 0x4000CAn incompatible app installed on your PC may be blocking the upgrade process. Make sure all incompatible apps are uninstalled and try the upgrade process again.
0xC1900107A cleanup operation from a previous installation attempt is pending and a system restart is required to continue the upgrade. Restart the device and run setup again. If restarting the device doesn’t solve the problem, use Disk Cleanup to delete both the temporary files and the system files. For more information, see Disk Cleanup in Windows 10.
0x80073712A file that Windows Update needs may be damaged or missing. Try to repair your system files: Start select theStart button and type command prompt in the search box on the taskbar. Select Command Prompt from the list of results. In the window that appears, type DISM.exe / Online / Cleanup-image / Restorehealth and press ENTER.
0xC1900200 – 0x200080xC1900202 – 0x20008Your PC may not meet the minimum requirements to download or install the upgrade to Windows 10. Learn more about the minimum requirements for Windows 10
0x800F0923This could indicate that a driver or other software on your PC is incompatible with the upgrade to Windows 10. Contact Microsoft support for information on how to fix this problem.
0x80200056The upgrade process may have been interrupted because you accidentally restarted your PC or signed out of your PC. Repeat the upgrade process, making sure your PC is plugged in and left on.
0x800F0922Your PC may not be able to connect to the Windows Update servers. If you are using a VPN connection to connect to a work network, disconnect from the network and disable the VPN software (if applicable). Then repeat the upgrade process. There may not be enough free space on the partition reserved for the system. You may be able to fix the problem by using third-party software to free up space on the system reserved partition.
Error: Updates could not be completed. Changes are undone. Do not turn off your computer.Error: Failed to configure Windows updates. Changes are undone.These are general errors that can appear any time a Windows update fails. You need the specific error code to figure out the best way to solve the problem. You can find the error code for problematic updates in your update history. Find the update that did not install, write down the error code, and contact Microsoft support. How to view the update history on Windows 8.1 Open Windows Update by swiping from the right edge of the screen (or, if you’re using a mouse, point to the lower right corner of the screen and move the pointer up), select Settings to see the settings for the PC-> Update and Recovery > Change > View the update history. How to view the update history in Windows 7: Select the Start button. Enter update in the search box, then select Windows Update > View update history from the list of results.
Error: The update is not available for your computer.The required updates may not be installed on your PC. Before upgrading, make sure that all critical updates are installed on your PC.
0x80070070 – 0x500110x80070070 – 0x500120x80070070 – 0x60000There is probably not enough free space on your PC to install the upgrade. Free some space on the drive and try again. Tips for freeing up space on the drive
0x80300024The specified disk operation is not supported by the target disk, partition, or volume. Make sure your computer meets the minimum requirements to install Windows 10.
0x80070002 0x20009The specified file was not found. If you have one or more disks on which you are not installing Windows 10, remove those disks. 
0xC1900101 0x200170xC1900101 0x30017A driver caused a problem.Disable or remove any third-party antivirus or antispyware programs from your system. Disconnect all peripheral devices connected to the system except for the mouse, keyboard, and display.Contact your hardware manufacturer for updated device drivers.
0x8007042B 0x4000DWindows Setup terminated unexpectedly because another process was running in the background.When Windows starts up normally, numerous applications and services start automatically and run in the background. This includes basic system processes, antivirus software, system utility applications, and other previously installed software. These applications and services can cause glitches when you try to update to the latest version of Windows 10.A “clean start” may be required to determine if a background program is interfering with the upgrade. Here’s how to do a clean boot in Windows .
0x800700B7 0x2000aWindows Setup terminated unexpectedly because another process was running in the background.Uninstall any antivirus or antispyware programs and update again.  

Leave a Comment